errol
New Member
Posts: 35
|
Post by errol on Nov 21, 2009 16:47:33 GMT
High Peeps im a DYE tec now so if you have problems let me know i'll see if i can help
Errol
|
|
|
|
Post by baker on Nov 24, 2009 22:53:33 GMT
you could be the man im looking for
|
|
peteds
Team
The Boss
Posts: 355
|
Post by peteds on Nov 25, 2009 16:47:59 GMT
High Peeps im a DYE tec now so if you have problems let me know i'll see if i can help Errol funny you should say that, i'm after a set of eyes for a pm7 mate. |
|
|
|
Post by bunglerelli on Nov 25, 2009 18:03:33 GMT
High Peeps im a DYE tec now so if you have problems let me know i'll see if i can help Errol funny you should say that, i'm after a set of eyes for a pm7 mate. Funnily enough Pete so am i. |
|
errol
New Member
Posts: 35
|
Post by errol on Nov 25, 2009 19:22:19 GMT
Will find out if i can get them tomorrow guys,are the eye broken ? what are then symptoms?
what can i do for you Ben
|
|
|
|
Post by baker on Nov 25, 2009 19:48:54 GMT
just check over a dm9 for me as im gettin git from a 14yr and dont really llike the fact that he might of done something to it also anychance of getting me some allan keys or a multitool?
|
|
errol
New Member
Posts: 35
|
Post by errol on Nov 25, 2009 20:15:37 GMT
will also inquire about multi tool no problem just need to get DM over to me to have a look look at bud
|
|
|
|
Post by bunglerelli on Nov 26, 2009 16:46:17 GMT
Will find out if i can get them tomorrow guys,are the eye broken ? what are then symptoms? what can i do for you Ben kl kl, cheers dude, mine isn't giving me the red led on start up but a solid green which then turns to a flashing green after 1 trigger pull, changed the battery as stated in manual, no change. Also how can i get mine to go into Mill mode as it will only allow me to set either semi or psp mode (2 flashes). |
|
|
|
Post by tait on Nov 26, 2009 18:10:52 GMT
kl kl, cheers dude, mine isn't giving me the red led on start up but a solid green which then turns to a flashing green after 1 trigger pull, changed the battery as stated in manual, no change. Also how can i get mine to go into Mill mode as it will only allow me to set either semi or psp mode (2 flashes). Your eyes are duff/not plugged in pal, mine does the same! Not used eyes in mine pretty much all season and it only chopped 3 times max and that was when i shot my hopper dry, i had to turn them off though as the board goes into default 8bps max if you leave them on. now this is if the set up for your board is the same for the ul board. On the yellow light in the settings hold the trigger in and it should flash from 1 to 4 times (previous setting) . pull the trigger twice then the led flashes mutiple colours that should be set for mill settings. Do the same on the blue light on setting 1 for 10bps. |
|
|
|
Post by baker on Nov 26, 2009 20:53:35 GMT
looks like i will have to get back into the swing of flashing lights with this dm until i get a tadado board. hope jay left it in MS mode and ROf
|
|
peteds
Team
The Boss
Posts: 355
|
Post by peteds on Nov 26, 2009 22:55:11 GMT
Will find out if i can get them tomorrow guys,are the eye broken ? what are then symptoms? what can i do for you Ben deff, broken, the ribbon snapped. |
|
errol
New Member
Posts: 35
|
Post by errol on Nov 27, 2009 19:09:39 GMT
I can still get PM7 eye looms they are £12 so idf want more let me i can also fit they if need.
|
|
errol
New Member
Posts: 35
|
Post by errol on Nov 27, 2009 19:15:14 GMT
Will find out if i can get them tomorrow guys,are the eye broken ? what are then symptoms? what can i do for you Ben kl kl, cheers dude, mine isn't giving me the red led on start up but a solid green which then turns to a flashing green after 1 trigger pull, changed the battery as stated in manual, no change. Also how can i get mine to go into Mill mode as it will only allow me to set either semi or psp mode (2 flashes). your eyes mite be fine i have just fixed a PM7 with the same problem it was a common fault. when you plug eyes in you should have a tag if you fold one way it should work its hard to explain if you are around on 29th i can Show you |
|
|
|
Post by bunglerelli on Nov 27, 2009 23:12:42 GMT
kl kl, cheers dude, mine isn't giving me the red led on start up but a solid green which then turns to a flashing green after 1 trigger pull, changed the battery as stated in manual, no change. Also how can i get mine to go into Mill mode as it will only allow me to set either semi or psp mode (2 flashes). your eyes mite be fine i have just fixed a PM7 with the same problem it was a common fault. when you plug eyes in you should have a tag if you fold one way it should work its hard to explain if you are around on 29th i can Show you yea thats reads harder than it properly is, i just plugged the ribbon in the connector i pulled it out of unless you mean for me to plug it in on the flip side if you get my drift. Tait, i've tried all sorts to get it programmed or mill, will just have to use psp as its basically the same, BPS is set fine at one flash. |
|
errol
New Member
Posts: 35
|
Post by errol on Nov 28, 2009 9:01:24 GMT
plug ribbon in then bend to left gently does it work?
as above but right?
|
|
