|
|
Post by bubblegumbob on Jul 8, 2009 13:33:26 GMT
ok need some advise on witch is the better speed Feed the dye one or vurtue one (yes i cant spell)
any advise please
|
|
|
|
Post by Mick on Jul 8, 2009 14:37:18 GMT
Ok as i see it you have 3 options
1/ Get a Rotor speed feed top, you can then swap between the 2 tops according to the weather
2/ Rotor speed feed, no protection if raining
3/ Virtue speed feed, no protection if raining
As far as use goes i can only comment on the Rotor s/f and have not had any problems with mine
|
|
|
|
Post by dunkthemunk on Jul 8, 2009 16:03:15 GMT
rotor speed feeds sag alot, you lose alot of space in the hopper and balls fall out, if you get shot in it its all over for the speed feed to.
Virtue apparently doesnt sag so gives u the same amount of room in the hopper and you dont lose balls but it has a higher profile.
you can combat the loss of space from sagging on the dye s/f by buying the HC lid but again leads to a bigger profile
hmmmmm this hasnt helped at all has it
|
|
|
|
Post by bubblegumbob on Jul 8, 2009 16:26:50 GMT
might just stick with a lid
|
|
|
|
Post by toonarmy on Jul 9, 2009 9:05:56 GMT
what about carls feed he made! that keeps a low profile but dont sag! what feed was that made with?
|
|
|
|
Post by Mick on Jul 9, 2009 10:06:25 GMT
made from the insert of a crown, didnt mention this earlier due to the technical side of doing this
|
|
|
|
Post by bubblegumbob on Jul 9, 2009 15:31:56 GMT
sound diffcult anyone any idear of how its done
|
|
|
|
Post by toonarmy on Jul 9, 2009 15:40:48 GMT
yeah you get the feed and round out one of the edges with a stanley knife so it can fit in the area that the dye speed feed should. wont sag though. its probably what i will do
|
|
|
|
Post by tait on Jul 10, 2009 14:33:31 GMT
Exalt have brought one out. fits inside or something,check it out @ lips i think! (well its on pb nation)
|
|
bizy42
Moderator 
been playing way to long
Posts: 305
|
Post by bizy42 on Jul 10, 2009 20:57:44 GMT
from lips website
but should be out soon
|
|
|
|
Post by baker on Jul 15, 2009 20:50:33 GMT
|
|
bizy42
Moderator
been playing way to long
Posts: 305
|
Post by bizy42 on Jul 16, 2009 11:15:51 GMT
if anyone wants these can they post up and i will find out if they ship to the uk and what it costs would maybe worth it in bulk
|
|
|
|
Post by bubblegumbob on Jul 16, 2009 16:08:25 GMT
depending on cost would be intrested for now have a vurtue rotor crown on the way
|
|
|
|
Post by Mick on Jul 16, 2009 16:53:53 GMT
If we are going to think about shipping in from the states, it may also be worth looking at the FEEDFAST RTR
|
|
bizy42
Moderator
been playing way to long
Posts: 305
|
Post by bizy42 on Jul 16, 2009 18:35:36 GMT
some how bubble i just knew you where going to post that
sorry mate but that was a post of the bleeding obvious
its about how many may want then getting the best price
|
|
